Terrain Tamer

Terrain Tamer's interior rear view mirror is a replacement part to suit BJ60, HJ60, HJ61, FJ60 and FJ62 series landcruisers.

QUANITITY REQUIRED: 1

Terrain Tamer 60 Series Tie Rod End Kits are: 

• Made in Japan
• Castellated Nuts
• Pre Tensioned

Suits HJ60, HJ61, FJ60 & Fj62 models from 8/80 to 1/90.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Terrain Tamer's swivel housing/steering knuckle repair kits are now available for 60 Series landcruisers!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Terrain Tamer’s Heavy-Duty Wheel Bearing Kits were designed and manufactured to extend the service life of wheel bearings in vehicles used for heavy towing and those operating in extreme conditions. 

QUANTITY REQUIRED: 2

BEARINGS:

• Made in Japan
• Rockwell Hardness Rating 2.5 points higher than OE
• Upgraded heat treatment procedure for longer service life

SEALS:

• Labyrinth construction prevents oil loss
• Rotates on internal surface, eliminating wear on components
• Utilises 4 sealing surfaces to protect against contaminants
  

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Terrain Tamer's Steering Damper, Return To Centre suits HJ60, HJ61, FJ60, FJ62 & BJ60 models!

A 4x4 steering damper is a device designed to reduce the effect of shocks and vibrations on the steering system of your vehicle. It works by dampening or absorbing these jolts before they reach the driver's hands, making it easier and safer to control your vehicle. Steering dampers are an essential part of any off-road prepared 4x4 vehicle as they ensure that you can safely traverse even the most rugged terrains with precision driving accuracy. They also help extend the life span of your suspension components by reducing wear and tear from repetitive shock loads on them. Terrain Tamer’s range of 4x4 steering dampers is built for superior performance and heavy-duty strength.

Steering dampers serve to reduce the effects of road shock and vibration on your 4x4’s steering system. They are designed to absorb these shocks, which can help provide a smoother ride and more control for the driver. This also reduces wear on suspension components as it prevents excessive force from being transmitted through them. When fitted with one of Terrain Tamer’s superior steering dampers, you will feel in complete control over any terrain you traverse - no matter how rugged it is! With Terrain Tamer's range of 4x4 steering dampers, you'll be able to handle even the toughest off-road conditions with ease.

Steering dampers provide a variety of benefits for 4x4 vehicles. They help reduce wear and tear on suspension components by absorbing shocks before they can be transmitted through them, thus extending their life span. Additionally, they make driving off-road smoother and easier since they absorb any jolts or vibrations coming up through the system to the driver's hands. With Terrain Tamer's range of 4x4 steering dampers installed, you'll be able to enjoy greater control over your vehicle in all kinds of terrain for an improved driving experience.

Quantity required: 1

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Terrain Tamer's high performance steering knuckle & wheel bearing repair kits are now available for 60 Series landcruisers!

QUANTITY REQUIRED: 1

BEARINGS:

• Made in Japan
• Rockwell Hardness Rating 2.5 points higher than OE
• Upgraded heat treatment procedure for longer service life

SEALS:

• Labyrinth construction prevents oil loss
• Rotates on internal surface, eliminating wear on components
• Utilises 4 sealing surfaces to protect against contaminants

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

FROM TERRAIN TAMER:

• Drilled and slotted rotor
• Non-directional pattern
• G-Coated 
• Ground finish to eliminate runout and taper
• Offers superior cooling-reduce hot spots & brake fade
  

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

PLEASE ENQUIRE WITH TEAM@SIEGEOVERLAND.COM TO PLACE YOUR ORDER!

Terrain Tamer Long awaited parabolic spring kit, will ship approx. 1 week from your order due to popular demand, be quick.

These springs are suited for a 50mm lift, and 0–500KG weight capacity, this is the only option currently available for 60 Series Landcruisers.

Traditional 4WD leaf springs are often thick, heavy, uncomfortable and loud, offering little to no flex. In response to this Terrain Tamer developed their 4WD Parabolic Leaf Springs, applying a carefully researched design and modern technology to a well-established idea from the trucking industry.

Utilising new technology on an old design, the parabolic springs allow for a comfortable ride whether the vehicle is fully loaded or empty.

• Lighter – Less unsprung weight
• Less Shock – Less shock load on the differential gears
• Quieter – The leaves do not touch each other
• Comfortable – With better articulation
• Strong – Exceptional load-carrying capability

DON’T MISS OUT.

What is a parabolic spring? 
Parabolic Leaf Springs typically contain fewer leafs than traditional leaf packs and get their name from their tapered “parabolic” design, meaning they are thicker in the centre and thinner at the ends. Already a well-established idea in the trucking industry, Terrain Tamer have applied their own carefully researched design and modern technology, and use a special grade steel to develop their range of Parabolic Leaf Springs specifically for 4WD vehicles.

How do parabolic springs work?
Traditionally heavy linear leaf packs can also be uncomfortable and loud and can create a safety issue, as they offer little to no flex, meaning that when a driver hits a bump, or finds themselves in a rough offroad situation, the rigidity of the leaf pack will cause the opposite wheel will lift, spinning and losing traction, ceasing drive and effectively endangering the driver. In a Parabolic spring, the tapered design of each leaf allows the stress to be distributed more evenly across the spring, and each leaf is allowed to work independently with enhanced flex without sacrificing load capacity, and keeping all four wheels on the ground.

What are the advantages of parabolic springs? 
This design of Parabolic Springs eliminates the weight of often heavy, thick, traditional leaf packs and dramatically reducing the unsprung weight of the vehicle, essentially freeing up the weight needed for practical use. This lower unsprung weight addresses the issue of GVM limits, and also acts to create a more comfortable ride when the vehicle is unloaded, accommodating the varying and ever-changing applications that the modern day 4WD is used for, freeing up weight for towing heavy loads, carrying tools or touring with the family, and ensuring it is comfortable whether empty or loaded. The Parabolic shape also provides better axle articulation, as well as almost no interleaf friction, allowing the spring to compress or extend with ease without touching each other until there is a reasonable load on the vehicle. This feature means that the springs are not only quieter, but it also acts to help minimise any issues with rust build up, which can be a major cause of failure in standard leaf springs.

Do parabolic springs offer better flex?
The Parabolic design allows the spring to flex while still providing the strength needed to bear the weight of heavy loads. This is particularly useful in 4WD applications that carry excessive load on the driveline, or when challenged with difficult terrain, as the flex afforded with a Parabolic Spring lets it give a little when the driver hits a bump in the road, allowing the differential housing to rotate with the springs and effectively providing a smoother ride, reducing the shock transferred to the crown wheel and pinion, stopping the wheel from spinning and maintaining safety and drive. The same force with a standard leaf pack would almost certainly cause more shock to the vehicle and driver 

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

A 4x4 steering damper is a device designed to reduce the effect of shocks and vibrations on the steering system of your vehicle. It works by dampening or absorbing these jolts before they reach the driver's hands, making it easier and safer to control your vehicle. Steering dampers are an essential part of any off-road prepared 4x4 vehicle as they ensure that you can safely traverse even the most rugged terrains with precision driving accuracy. They also help extend the life span of your suspension components by reducing wear and tear from repetitive shock loads on them. Terrain Tamer’s range of 4x4 steering dampers is built for superior performance and heavy-duty strength.

Steering dampers serve to reduce the effects of road shock and vibration on your 4x4’s steering system. They are designed to absorb these shocks, which can help provide a smoother ride and more control for the driver. This also reduces wear on suspension components as it prevents excessive force from being transmitted through them. When fitted with one of Terrain Tamer’s superior steering dampers, you will feel in complete control over any terrain you traverse - no matter how rugged it is! With Terrain Tamer's range of 4x4 steering dampers, you'll be able to handle even the toughest off-road conditions with ease.

Steering dampers provide a variety of benefits for 4x4 vehicles. They help reduce wear and tear on suspension components by absorbing shocks before they can be transmitted through them, thus extending their life span. Additionally, they make driving off-road smoother and easier since they absorb any jolts or vibrations coming up through the system to the driver's hands. With Terrain Tamer's range of 4x4 steering dampers installed, you'll be able to enjoy greater control over your vehicle in all kinds of terrain for an improved driving experience.

Quantity required: 1

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service.