Interior

Is your carpet getting a bit old, dirty and messy? 🧹

Do you need to clean it often, just to feel some cleanliness? 🧼

⏰ It could be time to replace it with TST Carpets; moulded and made in Australia 🇦🇺, TST Carpets are the best replacement carpet we could find for HJ60 and FJ60 Series Landcruisers.

TST Carpets come pre-moulded, all you need to do is trim the carpet down to size ✂️

Pre-moulded front and rear car carpet for the Toyota Landcruiser - Front & Rear Kit (HJ60,FJ60, 60 Series) 1980-1990

Warning: These may not fit HJ61, or FJ62 SERIES due to under-seat heaters, shop here for HJ61 and FJ62 model carpets.

Please note: does not include rear cargo and wheel wells unless selected.

Let us know: If you require left-hand drive/heel pad on the left, all orders revert to right-hand drive unless instructed otherwise.

These carpets even come with a heel pad on the driver's side. (though we do our best to colour code this heel pad, they default to black if colour isn't available).

Fitting instructions are included with the product, and no holes are cut in the carpet. There is an overlap between the front and rear so it can be trimmed in and adjusted to your car. This is an after-market product, though very close to the original 🕶

All of our products are made to order, so please ensure you've picked the correct model and colour that you're after.

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

 Is your 60 Series still wearing it's original carpet? Chances are very likely, yes it is 👎🏽

It most likely still has dog hair in there from the previous 2x owners, Maccas chips from that late night last year along with some other 'memories embedded' in it 🍟🐶

Definitely, time to replace 🔄

Your 60 Series isn't a new car, but we know there's been a few times when you've hopped in and thought "geez I wish this interior felt cleaner, newer, fresher" 😩

*Please note that wheel arch covers are not included in the rear for this set of carpet for HJ61 and FJ62

This is the first step to a fresh interior... 👄

What problems will this solve?

• Affordable interior refreshen 🍃
• Easy enough self-install; less than half a day 🪛
• Change or refresh the faded old colour 🧼
• Choose a new loop style, or retain the original style 🤌🏽

🔧 Installation, our thoughts? 🤔

Pretty simple install, our process looked like this:

• Throw down a canvas sheet 
• Remove the front seats and centre console
• Remove the rear seats
• Pull out the carpet
• Lay the old carpet down; mark out the old holes on the back of the new carpet, only slice these holes (don't fully cut them out)
• Do sound deadening removal and replace with Car Builders wagon pack (if up to it)
• Lay in your new carpet
• Begin cutting in (very carefully) your handbrake, shifter and seat holes
• Trim off the excess sides of the new carpet (overhanging doors etc.)
• Re-install seats
• Sit back and enjoy your work 👀🍺

Important details:

• 📦 This carpet is made to order; please allow 7-12 working days for your carpet to be shipped, although we aim for 3-4 working days before shipment; you accept that this will take up to 10 business days to make and send + shipping times
• 📑 Please note this carpet will suit; HJ60, HJ61, FJ60, FJ62. These really work well for HJ61s and FJ62s
• 💺 This carpet does cater to (although you will need to mark out and cut out) an under seat heater on the driver's side for HJ61's and FJ62's
• ✂️ Holes are not cut into these carpets; you will need to mark out and cut your own seat, heater, handbrake and shifter holes
• 👉🏽 Whilst these carpets are as close as can be to original; there is some age in the moulds and they may change over time, your floor pan may be slightly varied, or the carpet may take time to get to shape; please allow for this, carpets are made to order you accept all of these conditions when ordering this carpet
• Please note that wheel arch covers are NOT included with this carpet for the rear and must be ordered separately

Please Note our carpet comes with NO holes cut in it. Free fitting instructions can be found Here.

This set consists of 2-3 pieces, depending on your selection.

Our Moulded Carpet Range Comes In 4 Material Types, please note the colour per Carpet Pile/Material.

 
Loop Pile - This carpet is constructed using top-quality spun Acrylic yarn and is tufted on a 5/32" gauge tufting machine at 600 grams per square meter.
The carpet is produced in one-meter-wide rolls which are backed with Polyethylene which enables it to be moulded to the contours of an automotive floor pan.
As its name suggests loop pile carpet is made up using many small loops of yarn and is most commonly used in vehicles from the 1960's up until the mid 1980's.

Plush Pile - Uses a similar construction process to Loop pile but with a much higher yarn density of 750 grams per square meter.
Plush pile (sometimes referred to as Cut pile) gives a more luxurious appearance and is generally used in most vehicles from the mid 1980's to the present day.

Classic Loop - Our strongest and most durable carpet material. Manufactured by us using the original 80% Rayon and 20% Nylon yarn, it is an exact reproduction of the carpet used by the car makers during 1960’s to 1970’s, including the 60 Series Landcruiser, other types that used this were HK-HG Holden, XT-XY Falcon, Valiant Charger and many other models. It is available in most original colours including black, saddle (Ford), Chev + GMH blue, VH Commodore (Brock), Burgundy along with many other colours and is suitable for all makes and models including present day vehicles.

Super Plush - Uses a similar construction process to plush pile but with a much higher yarn density of 950 grams per square meter. Super Plush pile gives of a lush and thick luxurious appearance. Originally Used in the early 70s for SLE commodores, Ford LTD and Statesmen.  

Please Note the colour reproduction of these samples will vary dependant on the viewers graphics/monitor settings. Knox Auto Carpets have no control over these settings and would advise the customer to always phone us to discuss their requirements if they have any doubts regarding the correct colour for their vehicle."

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Due to significant demand and covid impacts, we are unfortunately posting out 1–2 weeks after purchase direct from our supplier. 

Control sound and heat in your truck ready for touring. This pack contains enough insulation to cover 4x4 wagons such as Nissan Patrols and Toyota Land Cruisers

STANDARD PACK

•  Pack 1 comes with Waterproof Carpet underlay - a peel and stick closed cell foam that you stick on the Sound Deadener. 

The 4x4 Wagon Floor pan pack includes:
SKU: 4X4_WGN_1  (approx 30kg)
3 Boxes (5.4 sq/m) of Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels, rear wheel arches
2 Boxes (3.6 sq/m) Water Proof Carpet Underlay -  Light weight, closed cell, peel and stick foam. At 10mm the waterproof underlay will replicate your factory underlay, reduce heat transfer and will cover your floor pan and rear firewall.
1 Sheet (1.5 sq/m) Mass Noise Liner - 1 x sheet at 1m x 1.5m,  2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl. This material is a dense sound transmission barrier typically used in luxury vehicles. The MNL is also removable and efficient to install. Install in rear cargo area direct to sheet metal as a sound blanket. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

PREMIUM PACKS

Please note that pre-cut floors will dispatch within 2-3 business days.

• Pack 2, 3 and 4 come with Mass Noise Liner Lite - a premium non stick underlay, is closed cell foam with a 2mm thick mass loaded vinyl layer on top. This is waterproof as well, and utilising the vinyl layer as a sound blanket it blocks more sound than Waterproof Underlay. 

The 4x4 Wagon Premium Floor pan pack includes:
Pack 2 (approx 45kg)
3 Boxes (5.4 sq/m) of Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels and rear wheel arches.
2.5 Sheets (3.8 sq/m)  Mass Noise Liner Lite- 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl, install in carpet area up to the rear cargo area. Note carpet gets installed directly ontop of this product.
1 Sheet (1.5 sq/m)  Mass Noise Liner - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl install in cargo area. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

The 4x4 Wagon Premium Floor Pan & Doors Pack includes:
Pack 3 (approx 55kg)
4 Boxes (7.2 sq/m) of Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels, rear wheel arches and door skins.
2.5 Sheets (3.8 sq/m)  Mass Noise Liner Lite - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl, install in carpet area up to the rear cargo area. Note carpet gets installed directly ontop of this product.
1 Sheet (1.5 sq/m)   Mass Noise Liner - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl install in cargo area. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

Full Kit - The 4x4 Wagon Premium Floor Pan, Doors & Roof Pack includes:
Pack 4 (approx 60kg)
5 Boxes (9.0 sq/m) Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels, rear wheel arches, doors and roof
2.5 Sheets (3.8 sq/m)  Mass Noise Liner Lite - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl, install in carpet area up to the rear cargo area. Note carpet gets installed directly ontop of this product.
1 Sheet (1.5 sq/m)   Mass Noise Liner - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl install in cargo area. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
3 Sheets (3 sq/m) Insul-Layer - Closed cell peel and stick foam to reduce noise and heat entering and exiting your roof skin.
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

Due to significant demand and covid impacts, we are unfortunately out of this product until around the 20th of October. This is a PRE–ORDER for 20th October.

Car Builders Stage 1 Sound Deadener is a vibration (sound) dampening mat. It consists of a butyl rubber noise absorption layer combined with an aluminium top layer.

Each box has 12 sheets, each sheet is 300x500mm and 2-2.2mm thick. 

Our butyl based Sound Deadener does not require heating, does not smell, will not go brittle over time - which are all qualities of old style tar or bitumen sound deadening materials. 

Our Sound Deadener does not run the risk of coming unstuck as there is no adhesive layer to fail - our pressure sensitive butyl rubber is sticky by itself. 

Features/Advantages

• Easy installation - just peel off the release liner and roll it on
• 100% waterproof - does not rot or deteriorate
• Cuts with scissors or a knife
• Reduces heat transfer
• Conforms and fuses easily to all types of sheet metal

Applications

• Under carpets
• Roof skins
• Inside cavities
• 1/4 panels
• Doors
• Boots/trunks
• Firewalls
   

Colours (product is exactly the same - only the print on the aluminium changes)
Silver - Silver with black logo
Black - Black with silver logo
OEM Black - Plain black no logo

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Replace your empty blank HVAC plate with something useful! Add two switches or 1 2-1/16" Gauge to your FJ62!

3D printed out of a Heat resistant, UV resistant, sandable, paintable, ASA plastic

This piece snaps into place just like your original blank plate does so no modification to your control panel is necessary for most applications.

The Toyota switches and the aftermarket heated seat switches are  recessed to preserve that OEM Toyota look in your Land Cruiser.

Each unit is individually sold.

*First picture is of a painted piece from a user*
*Switches Not Included.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

This listing is for a set of precision laser cut adapter plates that allow you to fit Falcon seats (Ba-Fgx) into your 60 series Landcruiser.

As with all our kits, this is a bolt in mod with no drilling, welding or cutting required. The kit comes with all nuts, bolts and spacers required. All you need to install it is a socket set, some Ford seats (BA - FG) and an hour or so of your time. Full colour instructions are also provided.

The custom leather seats you see in the pictures are by Incharge Automotive Enhancements. Contact them directly if you would like a quote:

inchargeautomotive.com.au

Please note - The kit varies depending on your current set-up whether that be double bucket or bucket/bench factory combinations. Please be sure to order the correct kit for your current combination noting that Sahara rails are not compatible, if you have a Sahara you will also need to locate standard GXL sliding rails from a 60 series. These kits have been designed to pass compliance laws in all Australian states. Legislation requires, however, that the installation must be sighted and signed off officially by a certified engineer in the state that the car is registered. Until certified, these kits are intended for offroad use only. Seats not included in sale.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service.