Storage

Welcome to storage.. level 1200, unlocked 🔓🧳

The Huracan Tailgate storage mod is a must do; if you're thinking about it... I get it 🤔

Why bother? 🥱

Let me tell you some problems this WILL solve for you 👇🏽

• Organisation 🗃
• Storage 🧰
• Travelling efficiency 🚙
• Strong 💪🏽
• Use as a bench 🍳
• Easy install, under 45mins ✅

If you travel in your 60, and you have a tailgate, you're already winning in our opinion, but once you install one of these bad boys; it is a game changer ⛳️

It means that you can store recovery, cleaning, tool, tyre changing or whatever other gear your feel necessary all in one spot.

The kit comes with close cell foam for sound and panel insulation 🤫 🔇; so nothing needs to be sitting directly on your tailgate panel (on the inside), and potentially harming the panel, like you and all us have been doing on the inside rear quarter panels 😩

The installation is super simple, requiring a grinder, sockets and a screw driver you simply mark our the template included trim out the section of tailgate and utilise the existing trimming holes to bolt the storage mod to 👩🏽‍🔧

From Huracan Fabrication:
"This precision laser cut steel modification plate allows you to turn your tailgate into a locked compartment within your car.

You can use the space to store recovery gear, spare parts or anything else that will fit and you want to keep secure. This is a DIY kit and requires you to trim away some of the metal in the tailgate. To assist with this, we provide step by step easy to follow instructions and a handy template to show where the cuts are required. This can be performed with tin snips, a jigsaw or an angle grinder.

By default, the kit will be painted black and ship with all mounting hardware required such as nuts and bolts for mounting, hinge and associated screws as well as the heavy duty low profile locks. Sound deadening foam to stick inside your tailgate which prevents damage to the steel and eliminates rattles is also included. Please allow up to one week handling time for your kit to be assembled, packed and picked up by our couriers."

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

NOTE: flat rate shipping cost of $150 will be charged at checkout. We will then do our best to find you the most affordable shipping rate to your provided address. You may be charged an additional fee for the difference of cost once the final product is booked for delivery.

Introducing, a game-changing new product from Department of the Interior developed in collaboration with Siege Overland: 60 Series Centre Consoles, AKA the ultimate luxury upgrade for your 60 series 😮

After years of being jealous of the 79 series centre console upgrades by DOTI, the time has finally come for us 60 series owners... we knew we had to do something.

This is the number 1 upgrade we have EVER made to our 60 series, it is our dream, after 10 years of ownership, come true!

Made right here in Australia 🇦🇺🦘with DOTI's super soft, durable, vinyl material, cup holders (can you imagine?? no more coffees spilling everywhere during your morning drive ☕️) and an amazingly comfortable cushioned armrest (with storage 📥). PLUS, the ability to add on USB & 12V Sockets and/or Rocker Switch Panel Fit. It doesn't get any better!

Please note: 
- Product is made-to-order, with an approximate manufacturing lead time of up to 16 WEEKS.
- IMPORTANT: fitment can vary between vehicles and may not be an exact fit, some consoles may require minor adjustments depending on interior (e.g. carpet, sound deadener, dashboard variations, etc.). Consoles have not been built to fit additional factory options or accessories.- Please note, this 60 series centre console does not fit vehicles with factory differential locker assembly.
- Currently available for bucket seat, RHD configuration only (excludes PTO). 
- For international orders (outside of Australia) please email team@siegeoverland.com for a shipping quote.

DIMENSIONS
Length - 90cm
Width - 27cm (armrest & gear shift) / 17cm (cup holders)
Height - 39cm (armrest) / 24cm (gear shift) / 13cm (cup holders) 

-

Notes from DOTI: 

• Built tough- this product is constructed with exterior grade, marine bonded plywood
• Easy to clean- the ABS plastic cup holders and L shape storage tray, and the internal lining are all removable. You can easily take these items out of the console to clean
• French Seam upholstery- our product has a professional soft padded vinyl finish.
• No rattles- we use ABS plastic instead of metal for our cup holders and storage tray to avoid any rattles from coins, cans, metal coffee mugs etc.
• Easy to fit- Installation hardware and clear installation instructions are included.
• Handmade in Australia - our team are expert craftsmen who make each and every console by hand, ensuring you get only the best for your 60 series!

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

NOTE: flat rate shipping cost of $150 will be charged at checkout. We will then do our best to find you the most affordable shipping rate to your provided address. You may be charged an additional fee for the difference of cost once the final product is booked for delivery.

Introducing, a hot product from the team at Department of the Interior, the "L" shape floor tray...AKA the perfect storage solution for 60 series owners with the factory 3/4 bench seat 😮

Made right here in Australia 🇦🇺🦘with DOTI's super soft, durable, vinyl material, two cup holders (Imagine that? no more coffee spilling everywhere during your morning drive ☕️) and a handy storage pocket. This upgrade is a MUST!

IMPORTANT: there are NO factory points which can be utilised for this product meaning you will need to drill and fit 2 nutserts. You must check underneath the vehicle to ensure the spot you are drilling will not cause any potential damage to the undercarriage of the vehicle. 

Please note: 
- Product is made-to-order, with an approximate manufacturing lead time of 10 WEEKS.
- Currently available for 3/4 bench seat, RHD, manual transmission only. 
- For international orders (outside of Australia) please email team@siegeoverland.com for a shipping quote.

DIMENSIONS
Length - 50cm
Width - 50cm
Height - 25cm

-

Notes from DOTI: 

• Built tough- this product is constructed with exterior grade, marine bonded plywood
• Easy to clean- the ABS plastic cup holders and L shape storage tray, and the internal lining are all removable. You can easily take these items out of the console to clean
• French Seam upholstery- our product has a professional soft padded vinyl finish.
• No rattles- we use ABS plastic instead of metal for our cup holders and storage tray to avoid any rattles from coins, cans, metal coffee mugs etc.
• Easy to fit- Installation hardware and clear installation instructions are included.
• Handmade in Australia - our team are expert craftsmen who make each and every console by hand, ensuring you get only the best for your 60 series!

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

NOTE: flat rate shipping cost of $150 will be charged at checkout. We will then do our best to find you the most affordable shipping rate to your provided address. You may be charged an additional fee for the difference of cost once the final product is booked for delivery.

Looking for an upgrade to modernise your 60 series interior? There is no doubt that these 60 Series Roof Consoles from Department of the Interior will take your cabin experience to the next-level 📈

Made right here in Australia 🇦🇺🦘 with DOTI's super-soft and durable vinyl, sturdy plywood framing and interior light provisions. PLUS, loads of addition features including; map lights, storage access, radio provisions, USB outlets and more, to choose at your hearts desire 🫶

The best part? These roof consoles will fit EVERY model of 60 series!

Please note: 
- Product is made-to-order, with an approximate manufacturing lead time of up to 16 WEEKS.
- For international orders (outside of Australia) please email team@siegeoverland.com for a shipping quote.

DIMENSIONS
Length - 88cm
Width - 22cm
Height - 10cm 

-

Notes from DOTI: 

• Built tough- this product is constructed with exterior grade, marine bonded plywood
• French Seam upholstery- our product has a professional soft padded vinyl finish.
• Easy to fit- installation hardware and clear installation instructions are included.
• Handmade in Australia - our team are expert craftsmen who make each and every console by hand, ensuring you get only the best for your 60 series!

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

Welcome to storage.. level 1200, unlocked 🔓🧳

The Huracan Tailgate storage mod is a must do; if you're thinking about it... I get it 🤔

Why bother? 🥱

Let me tell you some problems this WILL solve for you 👇🏽

• Organisation 🗃
• Storage 🧰
• Travelling efficiency 🚙
• Strong 💪🏽
• Use as a bench 🍳
• Easy install, under 45mins ✅

If you travel in your 60, and you have a tailgate, you're already winning in our opinion, but once you install one of these bad boys; it is a game changer ⛳️

It means that you can store recovery, cleaning, tool, tyre changing or whatever other gear your feel necessary all in one spot.

The kit comes with close cell foam for sound and panel insulation 🤫 🔇; so nothing needs to be sitting directly on your tailgate panel (on the inside), and potentially harming the panel, like you and all us have been doing on the inside rear quarter panels 😩

The installation is super simple, requiring a grinder, sockets and a screw driver you simply mark our the template included trim out the section of tailgate and utilise the existing trimming holes to bolt the storage mod to 👩🏽‍🔧

From HFab USA:
"This precision laser cut steel modification plate allows you to turn your tailgate into a locked compartment within your car. You can use the space to store recovery gear, spare parts or anything else that will fit and you want to keep secure.This is a DIY kit and requires you to trim away some of the metal in the tailgate. To assist with this, we provide step by step easy to follow instructions and a handy template to show where the cuts are required. This can be performed with tin snips, a jigsaw or an angle grinder.

By default, the kit will be painted black and ship with all mounting hardware required such as nuts and bolts for mounting, hinge and associated screws as well as the heavy duty low profile locks. Sound deadening foam to stick inside your tailgate which prevents damage to the steel and eliminates rattles is also included. Please allow up to one week handling time for your kit to be assembled, packed and picked up by our couriers."

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Make storing and organizing gear and valuables a no-brainer. These 2 lockable drawers with fitted deck and faceplates have been originally designed for the Nissan Patrol Y61, these are the perfect fit for a 60 Series Landcruiser. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle.

Engineered tough for both on and off-road travel.

This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.

• 113kg / 250 lb per drawer load carrying capacity.
• High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
• Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
• The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
• Customize your own storage configurations. Stack and secure luggage, Wolf Pack, Cub Pack, aluminum boxes and other storage containers to the top deck using Front Runner Stratchits or other straps.
• The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides.
• The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
• To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
• To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer.
• The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicle’s interior contours.
• The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
• Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
• This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicle’s existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy.

All Front Runner Storage Systems are backed by a 2 year warranty.

*Please Note: Cub Packs, Flat Packs and Drawer Dividers are not included when purchasing this Drawer System and are sold separately.

Consists of:
1 x Front Runner Drawer unit (SSDR002)
1 x Front Runner Drawer Nissan Patrol Y61 Deck Completion Set
2 x Push to Close latch with 2 keys per lock
3 x Accessory Channels
6 x Eye Nuts for Accessory Channel
Installation Hardware including 4 turnbuckles to secure unit to vehicle
Fitting Instruction

Materials used:
Aluminum - Accessory Channels & Sub Frame
Black powder coated steel - Drawer Bins & Frame
Carpet & Laminated plywood - Top Deck & Deck Set

Product Dimensions:
972mm (38.3") L x 1346mm (53") W x 328mm (12.9") H

Interior Drawer Dimensions:
Left Hand Drawer:
914mm (36") L x 461mm (16.4") W x 208mm (8.2") H

Right Hand Drawer:
914mm (36") L x 373mm (14.7") W x 208mm (8.2") H

Weight:
76.12Kg (167.8lbs)

Load Rating:
113Kg (250lbs) per Drawer

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service.