Products

NOTE: flat rate shipping cost of $150 will be charged at checkout. We will then do our best to find you the most affordable shipping rate to your provided address. You may be charged an additional fee for the difference of cost once the final product is booked for delivery.

Introducing, a hot product from the team at Department of the Interior, the "L" shape floor tray...AKA the perfect storage solution for 60 series owners with the factory 3/4 bench seat 😮

Made right here in Australia 🇦🇺🦘with DOTI's super soft, durable, vinyl material, two cup holders (Imagine that? no more coffee spilling everywhere during your morning drive ☕️) and a handy storage pocket. This upgrade is a MUST!

IMPORTANT: there are NO factory points which can be utilised for this product meaning you will need to drill and fit 2 nutserts. You must check underneath the vehicle to ensure the spot you are drilling will not cause any potential damage to the undercarriage of the vehicle. 

Please note: 
- Product is made-to-order, with an approximate manufacturing lead time of 10 WEEKS.
- Currently available for 3/4 bench seat, RHD, manual transmission only. 
- For international orders (outside of Australia) please email team@siegeoverland.com for a shipping quote.

DIMENSIONS
Length - 50cm
Width - 50cm
Height - 25cm

-

Notes from DOTI: 

• Built tough- this product is constructed with exterior grade, marine bonded plywood
• Easy to clean- the ABS plastic cup holders and L shape storage tray, and the internal lining are all removable. You can easily take these items out of the console to clean
• French Seam upholstery- our product has a professional soft padded vinyl finish.
• No rattles- we use ABS plastic instead of metal for our cup holders and storage tray to avoid any rattles from coins, cans, metal coffee mugs etc.
• Easy to fit- Installation hardware and clear installation instructions are included.
• Handmade in Australia - our team are expert craftsmen who make each and every console by hand, ensuring you get only the best for your 60 series!

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

Introducing Brown Davis' 175L Long Range Fuel Tank manufactured to suit TOYOTA LANDCRUISER - 60 SERIES - FJ/HJ60/62 - WAGON

Please Note: these are made to order, with a 10-12 week lead time.

Brown Davis long range fuel tanks are an engineered solution to enable you to travel further with less fuel stops. They are designed to give maximum fuel capacity without affecting ground clearance, ramp over or departure angle, whilst being exceptionally strong to withstand the most rigorous of conditions. Brown Davis long range tanks allow you to travel to the most remote parts of the globe where the standard tank wouldn’t take you.

Replacement Long range tanks are designed to replace the vehicles standard fuel tank with an increased fuel capacity. The tank is a simple bolt in solution to increase your vehicles driving range. On the current model dual cab ute range the fuel capacity increase is around 1 00%. Replacement fuel tanks are designed to minimise vehicle modifications utilising the standard fuel gauge, pump assembly and fill point for a simple installation. All Brown Davis fuel tanks come with a flush mounted drain plug for easy draining in the event of contaminated fuel. The tanks come with all parts and hardware supplied.

Brown Davis Aluminised Steel long range fuel tanks are constructed from 2mm aluminium coated cold rolled steel, to ensure maximum strength and durability. This gauge of steel is sufficiently resistant to impact damage that additional tank guards are not necessary. The aluminium coating on the specific steel used by Brown Davis, offers the best of both worlds with the strength of steel and the anti corrosion properties of aluminium.

TANK TYPE: REPLACEMENT
CAPACITY: 175 LITRE
FILLER POINT: STANDARD
FUEL SUPPLY METHOD: STANDARD
FITTING TIME: 3 hour/s
MODIFICATIONS: REMOVE SPARE WHEEL
PRODUCT COLOR: BLACK
SHIPPING WEIGHT:50 Kg

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Direct reproduction decal depicting the 3F tuning specifications as found on 60-series Land Cruiser. Meticulously reproduced off an OEM sample with a state-of-the-art printing system. Printed on premium vinyl and over-laminated to ensure years of trouble-free service.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

• Semi metallic material composition
• OE Manufacturer
• High fade resistance specific for 4WD
• Patented technology 

QUANTITY REQUIRED: 1

Reproduction 4WD Employment Advice decal to suit 60-Series Land Cruiser, this decal has been meticulously reproduced based off an OEM sample and sized correctly on an original vehicle. Printed and 2000-Series Avery vinyl and clear over-laminated for years of trouble-free use.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

Due to significant demand and covid impacts, we are unfortunately posting out 1–2 weeks after purchase direct from our supplier. 

Control sound and heat in your truck ready for touring. This pack contains enough insulation to cover 4x4 wagons such as Nissan Patrols and Toyota Land Cruisers

STANDARD PACK

•  Pack 1 comes with Waterproof Carpet underlay - a peel and stick closed cell foam that you stick on the Sound Deadener. 

The 4x4 Wagon Floor pan pack includes:
SKU: 4X4_WGN_1  (approx 30kg)
3 Boxes (5.4 sq/m) of Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels, rear wheel arches
2 Boxes (3.6 sq/m) Water Proof Carpet Underlay -  Light weight, closed cell, peel and stick foam. At 10mm the waterproof underlay will replicate your factory underlay, reduce heat transfer and will cover your floor pan and rear firewall.
1 Sheet (1.5 sq/m) Mass Noise Liner - 1 x sheet at 1m x 1.5m,  2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl. This material is a dense sound transmission barrier typically used in luxury vehicles. The MNL is also removable and efficient to install. Install in rear cargo area direct to sheet metal as a sound blanket. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

PREMIUM PACKS

Please note that pre-cut floors will dispatch within 2-3 business days.

• Pack 2, 3 and 4 come with Mass Noise Liner Lite - a premium non stick underlay, is closed cell foam with a 2mm thick mass loaded vinyl layer on top. This is waterproof as well, and utilising the vinyl layer as a sound blanket it blocks more sound than Waterproof Underlay. 

The 4x4 Wagon Premium Floor pan pack includes:
Pack 2 (approx 45kg)
3 Boxes (5.4 sq/m) of Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels and rear wheel arches.
2.5 Sheets (3.8 sq/m)  Mass Noise Liner Lite- 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl, install in carpet area up to the rear cargo area. Note carpet gets installed directly ontop of this product.
1 Sheet (1.5 sq/m)  Mass Noise Liner - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl install in cargo area. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

The 4x4 Wagon Premium Floor Pan & Doors Pack includes:
Pack 3 (approx 55kg)
4 Boxes (7.2 sq/m) of Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels, rear wheel arches and door skins.
2.5 Sheets (3.8 sq/m)  Mass Noise Liner Lite - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl, install in carpet area up to the rear cargo area. Note carpet gets installed directly ontop of this product.
1 Sheet (1.5 sq/m)   Mass Noise Liner - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl install in cargo area. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

Full Kit - The 4x4 Wagon Premium Floor Pan, Doors & Roof Pack includes:
Pack 4 (approx 60kg)
5 Boxes (9.0 sq/m) Stage 1 Sound Deadener -  Install on your floor, firewall, inner 1/4 panels, rear wheel arches, doors and roof
2.5 Sheets (3.8 sq/m)  Mass Noise Liner Lite - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl, install in carpet area up to the rear cargo area. Note carpet gets installed directly ontop of this product.
1 Sheet (1.5 sq/m)   Mass Noise Liner - 2 in 1 closed cell thermal water proof underlay with the addition of a heavy weight mass loaded vinyl install in cargo area. DO NOT PUT SOUND DEADENER UNDERNEATH THIS. 
3 Sheets (3 sq/m) Insul-Layer - Closed cell peel and stick foam to reduce noise and heat entering and exiting your roof skin.
1 x Install kit - Application Roller, Utility Knife and Aluminium Foil Tape

This is a full car package designed for Toyota Landcruisers. Includes 4x JTX LED Headlights, 1x RGB Harness and 4x Smart CANBUS Load Modules.

The lights themselves are road legal, but the RGB halos are for off road use only.

• The DRL Halo is really bright even in full sun light and it goes all the way around the light – not just up the sides.
• Unlike the standard 4×6″ LED Lights, the DRL Halo does not flash amber when indicating.
• The light output is amazing.
• In High Beam mode the low beam is also on – this is a setting within the light to ensure maximum brightness in high beam.
• They are indestructable and water proof
• They come with all the wiring harness and canbus load modules required for your car
• You get ADR certification and according to Qld Dept Transport they are the only ADR approved light
• They are made by us here in Melbourne. Always consider buying Australian Made

These are 4″x6″ rectangular headlights and they fit all 4″x6″ rectangular applications such as Toyota Landcruiser 80 and late 60-62 series. Also a lot of trucks and vans have 4×6 lights and they were popular in a lot of cars in the 70’s and 80’s. They are made to suit Australian left side of road so popular in old cars being brought to Australia and both lights are identical so no left or right side lights.

Specs:

• Headlight amp draw: 3A each.
• Halo amp draw: 0.35A each.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Is your carpet getting a bit old, dirty and messy? 🧹

Do you need to clean it often, just to feel some cleanliness? 🧼

⏰ It could be time to replace it with TST Carpets; moulded and made in Australia 🇦🇺, TST Carpets are the best replacement carpet we could find for HJ60 and FJ60 Series Landcruisers.

TST Carpets come pre-moulded, all you need to do is trim the carpet down to size ✂️

Pre-moulded front and rear car carpet for the Toyota Landcruiser - Front & Rear Kit (HJ60,FJ60, 60 Series) 1980-1990

Warning: These may not fit HJ61, or FJ62 SERIES due to under-seat heaters, shop here for HJ61 and FJ62 model carpets.

Please note: does not include rear cargo and wheel wells unless selected.

Let us know: If you require left-hand drive/heel pad on the left, all orders revert to right-hand drive unless instructed otherwise.

These carpets even come with a heel pad on the driver's side. (though we do our best to colour code this heel pad, they default to black if colour isn't available).

Fitting instructions are included with the product, and no holes are cut in the carpet. There is an overlap between the front and rear so it can be trimmed in and adjusted to your car. This is an after-market product, though very close to the original 🕶

All of our products are made to order, so please ensure you've picked the correct model and colour that you're after.

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

Want show your love for our treasured sixty's AND support Siege Overland? There is no better way than with our NEW 60 Series Landcruiser Co. T-Shirts!

Everyone needs the perfect t-shirt to complement an everyday, laid-back look. The ideal top for so many occasions, this lightweight cotton tee will keep you comfy around the house, out and about or while working on your next 60 series project!

• 100% combed and ring-spun cotton (Heather colors contain polyester)
• Fabric weight: 4.2 oz/yd² (142 g/m²)
• Pre-shrunk fabric
• Side-seamed construction
• Shoulder-to-shoulder taping

This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!

Size guide

Size guide

Introducing our Premium Quality custom moulded vinyl replacement cabin flooring (MVF) for our beloved 60 Series landcruisers!

This custom made flooring is the perfect option for Tradies, Outdoor Lovers, 4WDrivers or Restoration enthusiasts. They are 100% waterproof, pressure washable and won’t absorb any liquids.  

Please note, this product is made to suit models from 1980-1990!

To check if your models has high mounts or low mounts, look at the back of the front seats from the rear doors, measure the seat pedestals from the base of the floor to the top where the seat bolts in: 

- Low seat mounts measure 1" to 2" tall
- High seat mounts measure 3"to 4" tall  

Our vinyl floorings are locally manufactured using durable hard-wearing PVC vinyl, press moulded to the exact shape of your vehicles floor to ensure quality fitment. They do require some installation trimming and hole cutting as required (Please refer to the included general fitment guide for more help).

With the largest range of colours in Australia, you can customise your vehicle how you like!  

These are all made to have underlay fitted underneath, and needs to be fitted for best results. Underlay thickness should be 8 to 12mm thick. 

(This goes from the front firewall to just under the front seats, then from under the front vinyl to the back of the rear seat or top of the seat step (depending on model)) 

These heavy duty replacement vinyl floorings are not an exact replica of the factory supplied flooring. 

NOTE: This item is made to order, please allow between 1-2 weeks for your order to be dispatched.

MADE IN AUSTRALIA

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

We are excited to bring you our new Premium Quality Custom Moulded Vinyl Cargo replacement Flooring (MVF). 

• FLOOR & REAR SEAT: For 60 series models that has the cargo flooring that is fixed to the back of the 2nd row seats
  
• FLOOR ONLY:  For 60 series models that has the cargo flooring that covers the floor area only, This cargo flooring is designed to line up with the rear vinyl under the 2nd row seat. This Cargo flooring does not go up the 2nd row seat.

Please note, this product is made to suit models from 1980-1990!

This custom made flooring is the perfect option for Tradies, Outdoor Lovers, 4WDrivers or Restoration enthusiasts. They are 100% waterproof, pressure washable and won’t absorb any liquids.  

Our vinyl floorings are locally manufactured using durable hard-wearing PVC vinyl, press moulded to the exact shape of your vehicles floor to ensure quality fitment. They do require some installation trimming and hole cutting as required (Please refer to the included general fitment guide for more help). 

With the largest range of colours in Australia, you can customise your vehicle how you like!  

These are all made to have underlay fitted underneath, and needs to be fitted for best results. Underlay thickness should be 8 to 12mm thick. 

These heavy duty replacement vinyl floorings are not an exact replica of the factory supplied flooring. 

NOTE: This item is made to order, please allow between 1-2 weeks for your order to be dispatched.

MADE IN AUSTRALIA

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

We are excited to bring you our new Premium Quality Custom Moulded Vinyl  replacement wheel arches for your 60 series! 

This custom made flooring is the perfect option for Tradies, Outdoor Lovers, 4WDrivers or Restoration enthusiasts. They are 100% waterproof, pressure washable and won’t absorb any liquids.  

Our vinyl floorings are locally manufactured using durable hard-wearing PVC vinyl, press moulded to the exact shape of your vehicles floor to ensure quality fitment. They do require some installation trimming and hole cutting as required (Please refer to the included general fitment guide for more help). 

With the largest range of colours in Australia, you can customise your vehicle how you like! 

This listing is for a left and a right wheel arch only (2pc's), This only covers the rear wheel arches of the vehicle.

These heavy duty replacement vinyl wheel arches are not an exact replica of the factory supplied wheel arches. 

NOTE: This item is made to order, please allow between 1-2 weeks for your order to be dispatched.

MADE IN AUSTRALIA

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

This listing is for a set of precision laser cut adapter plates that allow you to fit Falcon seats (BA-FGx) or Commodore seats (VE) into your 60 series Landcruiser.

As with all Hurracan Fabrication kits, this is a bolt in mod with no drilling, welding or cutting required. The kit comes with all nuts, bolts and spacers required. All you need to install it is a socket set, some Ford seats (BA - FG) and an hour or so of your time. Full colour instructions are also provided.

The custom leather seats you see in the pictures are by Incharge Automotive Enhancements. Contact them directly if you would like a quote: inchargeautomotive.com.au

Please note - The kit varies depending on your current set-up whether that be double bucket or bucket/bench factory combinations.

Please be sure to order the correct kit for your current combination noting that Sahara rails are not compatible, if you have a Sahara you will also need to locate standard GXL sliding rails from a 60 series.

These kits have been designed to pass compliance laws in all Australian states. Legislation requires, however, that the installation must be sighted and signed off officially by a certified engineer in the state that the car is registered. Until certified, these kits are intended for offroad use only. Seats not included in sale.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Please note: Solarscreen Window Insulation kits are made-to-order and currently have a manufacturing lead time of up to 12 weeks before dispatch.

We are so excited to bring you Solarscreen Window Insulation manufactured to fit YOUR sixty series landcruiser! 

If you deal with some extreme summer heat, like us here down-under, or if you haven't got a functioning air conditioner...Solarscreen kits are an absolute GAME CHANGER when it comes to keeping the heat out in summer, or the warmth in for winter. 

Plus, this product could not be easier to install OR remove when you aren't using them, with high quality suction discs that don't fall off every 5 seconds!

3XM Canopies 60 Series Lift-Up Window compatible option coming soon 👀 

- PHOTO CREDIT: @sivanheyns, @fixie60, @gumpyspilgrimage via Instagram

A NOTE FROM SOLARSCREEN:

Keep the heat out in summer.
Nine layers of material ensure excellent insulation, reducing air-conditioning costs and eliminating damage to your vehicles interior caused by the powerful rays of the sun. 

Keep the warmth in during cold nights
While Solarscreen's insulation will prevent heat from entering your vehicle, they will also prevent heat from leaving your vehicle during the cold winter months.

Made to the exact shape of every window
Solarscreens are made using templates from each window!

Easy to put up and pull down
Solarscreens are attached to the glass using a series of suction discs. Our discs are manufactured exclusively for their effectiveness (no falling off every five minutes), and also their durability in high temperatures. By using suction discs to attach each screen to the glass we are able to keep the screen flush to the glass optimising the insulation. Attachment this way also enables you to open and close doors without removing your screens.

Absorb Sound
Nine layers of insulation work together to absorb sound as well as provide insulation from the heat and cold.

Block out light
Solarscreens insulating effectivness is achieved by blocking the path of light waves (both visible light waves and invisible heat waves). This means that no more light will come in through your windows - no more waking up with the first morning light!

Prevent 80% condensation
Solarscreens' composition includes three layers of closed cell anti-condensate material. By preventing the warm air from meeting the glass, Solarscreen's insulation eliminates 80% of condensation - no more drips!

Strong storage bag
Solarscreens are supplied with a heavy-duty 210 denier nylon storage bag for compact and convenient storage while not in use. When rolled into the bag, and average cab set (three windows) is approximately 20cm diameter. 

 Is your 60 Series still wearing it's original carpet? Chances are very likely, yes it is 👎🏽

It most likely still has dog hair in there from the previous 2x owners, Maccas chips from that late night last year along with some other 'memories embedded' in it 🍟🐶

Definitely, time to replace 🔄

Your 60 Series isn't a new car, but we know there's been a few times when you've hopped in and thought "geez I wish this interior felt cleaner, newer, fresher" 😩

*Please note that wheel arch covers are not included in the rear for this set of carpet for HJ61 and FJ62

This is the first step to a fresh interior... 👄

What problems will this solve?

• Affordable interior refreshen 🍃
• Easy enough self-install; less than half a day 🪛
• Change or refresh the faded old colour 🧼
• Choose a new loop style, or retain the original style 🤌🏽

🔧 Installation, our thoughts? 🤔

Pretty simple install, our process looked like this:

• Throw down a canvas sheet 
• Remove the front seats and centre console
• Remove the rear seats
• Pull out the carpet
• Lay the old carpet down; mark out the old holes on the back of the new carpet, only slice these holes (don't fully cut them out)
• Do sound deadening removal and replace with Car Builders wagon pack (if up to it)
• Lay in your new carpet
• Begin cutting in (very carefully) your handbrake, shifter and seat holes
• Trim off the excess sides of the new carpet (overhanging doors etc.)
• Re-install seats
• Sit back and enjoy your work 👀🍺

Important details:

• 📦 This carpet is made to order; please allow 7-12 working days for your carpet to be shipped, although we aim for 3-4 working days before shipment; you accept that this will take up to 10 business days to make and send + shipping times
• 📑 Please note this carpet will suit; HJ60, HJ61, FJ60, FJ62. These really work well for HJ61s and FJ62s
• 💺 This carpet does cater to (although you will need to mark out and cut out) an under seat heater on the driver's side for HJ61's and FJ62's
• ✂️ Holes are not cut into these carpets; you will need to mark out and cut your own seat, heater, handbrake and shifter holes
• 👉🏽 Whilst these carpets are as close as can be to original; there is some age in the moulds and they may change over time, your floor pan may be slightly varied, or the carpet may take time to get to shape; please allow for this, carpets are made to order you accept all of these conditions when ordering this carpet
• Please note that wheel arch covers are NOT included with this carpet for the rear and must be ordered separately

A note from our supplier: 

Loop Pile - This carpet is constructed using top-quality spun Acrylic yarn and is tufted on a 5/32" gauge tufting machine at 600 grams per square meter.
The carpet is produced in one-meter-wide rolls which are backed with Polyethylene which enables it to be moulded to the contours of an automotive floor pan.
As its name suggests loop pile carpet is made up using many small loops of yarn and is most commonly used in vehicles from the 1960's up until the mid 1980's.

Classic Loop - Our strongest and most durable carpet material. Manufactured by us using the original 80% Rayon and 20% Nylon yarn, it is an exact reproduction of the carpet used by the car makers during 1960’s to 1970’s, including the 60 Series Landcruiser, other types that used this were HK-HG Holden, XT-XY Falcon, Valiant Charger and many other models. It is available in most original colours including black, saddle (Ford), Chev + GMH blue, VH Commodore (Brock), Burgundy along with many other colours and is suitable for all makes and models including present day vehicles.

Please note our carpet comes with NO holes cut in it. Free fitting instructions:

1 - open your parcel, make sure you have everything you ordered
2 - Lay out your new carpet and pop moulded contours back into place if applicable
3 - Remove door sill plates, kick panels, front seats and rear seat base
4 - Remove centre console (where applicable), seat belt bolts and any other trims retaining old carpet
5 - Remove old carpet, keep it do not discard it yet. Remove old underfelt taking note of where it was. Vacuum or sweep the floor clean. Place the old carpet over your new moulded carpet. Using the old carpet as a template, mark any holes or additional cut outs on the new carpet with chalk. Do not cut yet. 
6 - If removing underfelt only, lay it in the same area as you removed it from. 
7 - Starting with the rear carpet, place your new carpet in the vehicle by entering it on the tunnel and working towards the sides.
8 - Now repeat this with the front carpet matching the contours of the carpet with the floor
9 - You may need to cut some of the holes you marked out earlier (gearstick, console brackets, etc.)
10 - After confirming the proper fit, cut the required holes as you fit the carpet to the vehicle
11 - depending on your particular model of vehicle it may be necessary to trim the excess carpet from the sides as most carpets are left slightly wider in case the carpet has been fitted slightly off centre.
12 - replace rear seat base, seat belt bolts, centre console, front seat bolts, kick panels, door sill plates and any other trims your removed earlier.

Please note the colour reproduction of these samples will vary dependant on the viewers graphics/monitor settings. Knox Auto Carpets have no control over these settings and would advise the customer to always email team@siegeoverland.com to discuss their requirements if they have any doubts regarding the correct colour for their vehicle.

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

 Is your 60 Series still wearing it's original carpet? Chances are very likely, yes it is 👎🏽

It most likely still has dog hair in there from the previous 2x owners, Maccas chips from that late night last year along with some other 'memories embedded' in it 🍟🐶

Definitely, time to replace 🔄

Your 60 Series isn't a new car, but we know there's been a few times when you've hopped in and thought "geez I wish this interior felt cleaner, newer, fresher" 😩

This is the first step to a fresh interior... 👄

What problems will this solve?

• Affordable interior refreshen 🍃
• Easy enough self-install; less than half a day 🪛
• Change or refresh the faded old colour 🧼
• Choose a new loop style, or retain the original style 🤌🏽

🔧 Installation, our thoughts? 🤔

Pretty simple install, our process looked like this:

• Throw down a canvas sheet 
• Remove the front seats and centre console
• Remove the rear seats
• Pull out the carpet
• Lay the old carpet down; mark out the old holes on the back of the new carpet, only slice these holes (don't fully cut them out)
• Do sound deadening removal and replace with Car Builders wagon pack (if up to it)
• Lay in your new carpet
• Begin cutting in (very carefully) your handbrake, shifter and seat holes
• Trim off the excess sides of the new carpet (overhanging doors etc.)
• Re-install seats
• Sit back and enjoy your work 👀🍺

Important details:

• 📦 This carpet is made to order; please allow 7-12 working days for your carpet to be shipped, although we aim for 3-4 working days before shipment; you accept that this will take up to 10 business days to make and send + shipping times
• 📑 Please note this carpet will suit; HJ60, HJ61, FJ60, FJ62. These really work well for HJ61s and FJ62s
• 💺 This carpet does cater to (although you will need to mark out and cut out) an under seat heater on the driver's side for HJ61's and FJ62's
• ✂️ Holes are not cut into these carpets; you will need to mark out and cut your own seat, heater, handbrake and shifter holes
• 👉🏽 Whilst these carpets are as close as can be to original; there is some age in the moulds and they may change over time, your floor pan may be slightly varied, or the carpet may take time to get to shape; please allow for this, carpets are made to order you accept all of these conditions when ordering this carpet

A note from our supplier:

Plush Pile - Uses a similar construction process to Loop pile but with a much higher yarn density of 750 grams per square meter.
Plush pile (sometimes referred to as Cut pile) gives a more luxurious appearance and is generally used in most vehicles from the mid 1980's to the present day.

Super Plush - Uses a similar construction process to plush pile but with a much higher yarn density of 950 grams per square meter. Super Plush pile gives of a lush and thick luxurious appearance. Originally Used in the early 70s for SLE commodores, Ford LTD and Statesmen.  

Please note our carpet comes with NO holes cut in it. Free fitting instructions:

1 - open your parcel, make sure you have everything you ordered
2 - Lay out your new carpet and pop moulded contours back into place if applicable
3 - Remove door sill plates, kick panels, front seats and rear seat base
4 - Remove centre console (where applicable), seat belt bolts and any other trims retaining old carpet
5 - Remove old carpet, keep it do not discard it yet. Remove old underfelt taking note of where it was. Vacuum or sweep the floor clean. Place the old carpet over your new moulded carpet. Using the old carpet as a template, mark any holes or additional cut outs on the new carpet with chalk. Do not cut yet. 
6 - If removing underfelt only, lay it in the same area as you removed it from. 
7 - Starting with the rear carpet, place your new carpet in the vehicle by entering it on the tunnel and working towards the sides.
8 - Now repeat this with the front carpet matching the contours of the carpet with the floor
9 - You may need to cut some of the holes you marked out earlier (gearstick, console brackets, etc.)
10 - After confirming the proper fit, cut the required holes as you fit the carpet to the vehicle
11 - depending on your particular model of vehicle it may be necessary to trim the excess carpet from the sides as most carpets are left slightly wider in case the carpet has been fitted slightly off centre.
12 - replace rear seat base, seat belt bolts, centre console, front seat bolts, kick panels, door sill plates and any other trims your removed earlier.

Please note: the colour reproduction of these samples will vary dependant on the viewers graphics/monitor settings. We have no control over these settings and would advise the customer to always email team@siegeoverland.com to discuss their requirements if they have any doubts regarding the correct colour for their vehicle."

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Introducing Brown Davis' 68L Auxiliary Long Range Fuel Tank manufactured to suit an automatic FJ/HJ60/62! This product is NOT suited for a 12HT engine.

Please Note: these are made to order, with a 10-12 week lead time.

Brown Davis long range fuel tanks are an engineered solution to enable you to travel further with less fuel stops. They are designed to give maximum fuel capacity without affecting ground clearance, ramp over or departure angle, whilst being exceptionally strong to withstand the most rigorous of conditions. Brown Davis long range tanks allow you to travel to the most remote parts of the globe where the standard tank wouldn’t take you.

This system is designed to pump the fuel from the Brown Davis auxiliary fuel tank into the vehicles standard fuel tank. At the flick of a switch, fuel will replenish your vehicles standard tank, which in turn is then fed to the engine. An LED gauge is supplied to show the driver the fuel level of the auxiliary fuel tank at all times. When the auxiliary tank becomes empty an automatic alarm will sound to alert the driver to switch the pump system off. This prevents the pump from continuously running, preventing fuel pump failure. All parts and hardware for installation are supplied.

Brown Davis Aluminised Steel long range fuel tanks are constructed from 2mm aluminium coated cold rolled steel, to ensure maximum strength and durability. This gauge of steel is sufficiently resistant to impact damage that additional tank guards are not necessary. The aluminium coating on the specific steel used by Brown Davis, offers the best of both worlds with the strength of steel and the anti corrosion properties of aluminium.

TANK TYPE: AUXILIARY
CAPACITY: 68 LITRE
FILLER POINT: TWIN FILLER
FUEL SUPPLY METHOD: INDEPENDENT ENGINE FEED
TANK LOCATION: UNDER MIDDLE
FITTING TIME: 6 hour/s
MODIFICATIONS: DOES NOT AFFECT EXHAUST OR SPARE WHEEL
PRODUCT COLOR: BLACK

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service.