HJ61

Direct reproduction decal depicting the fusebox specification details as found on the fusebox of 60-SERIES LANDCRUISER (EARLY). Meticulously reproduced off an OEM sample with a state-of-the-art printing system. Printed on premium vinyl and over-laminated to ensure years of trouble-free service.

Note : This version is for the pre face-lift version with round headlamps.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Terrain Tamer 4WD front & rear wheel bearing replacement kits:

• Bearings & Seals Made in Japan

QUANTITY REQUIRED: 2

What is a wheel bearing kit?
A 4x4 wheel bearing kit is a complete replacement package that contains everything you need to replace your vehicle's wheel bearings. It typically includes new hub bearings and races, seals, snap rings, lug nuts and other components necessary for the installation. A 4x4 wheel bearings replacement kit is essential for extending the life of your car or truck’s suspension system and prevents excessive wear on your tires. Proper maintenance of your wheel bearing kit ensures a smoother ride with better handling response.

How does wheel bearing work?
Wheel bearing kits are designed to keep the wheels rolling smoothly and evenly, while also helping to absorb shock from the road. As your tires move over bumps and dips in the terrain, your wheel bearings cushion the impact of those changes in the road surface. The metal components of a 4x4 wheel bearing kit hold everything together while allowing for a slight amount.

What are the advantages of wheel bearings? 
Using a 4x4 wheel bearing kit is beneficial in many ways. It helps to extend the life of your vehicle's suspension system, prevents excessive wear on your tires, and provides a better handling response with a smoother ride. Additionally, these kits also help absorb shock from road bumps and dips for added safety and protection for you and your passengers. Depending on how often you drive off-road or in rough terrain, regular maintenance of your wheel bearing kit can greatly improve performance over time. Maintenance may include replacing bearings as needed or checking nuts and bolts periodically to ensure proper operation.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Terrain Tamer Tie Rod Ends are: 

• Made in Japan
• Castellated Nuts
• Pre Tensioned

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

This is a full car package designed for Toyota Landcruisers. Includes 4x JTX LED Headlights and 2pr. of CANBUS Load Modules. This is all the necessary wiring required to make the lights and halos work.

The purpose of having yellow headlights is to improve visibility at night by removing blue to violet colors from the wavelength spectrum. Alternatively, if you are going for a retro or racer look, these will also complement the look.

The headlight internals are identical to our very popular standard 7″ LED Headlights; this is just a different colour lens.

These are our famous 7 Inch LED Headlights, featuring impressive range, good spread, colourful halos and are indestructible. These draw less power than your regular halogen / HID globes too, and are ADR approved, meaning they’re legal in every state.

These are 7″ round headlights and they fit all 7″ round applications. We have sold thousands and we are yet to have a car with 7″ lights they don’t fit. They are to suit Australian left side of road and are legal in all states. In fact they have ADR cert stamped on the lens and come with an ADR certificate.

JTX LED lights are made by us here in Melbourne. We carry all the components to make up all colour combinations. We make them up and send next day or even same day if we know soon enough. We are the only manufacturer of LED headlights in Australia – please consider supporting Australian businesses.

These are unbreakable. They come with a lifetime warranty and we will replace a light even if it is damaged in a collision. You cant even break them with a hammer.

They have breathers so as to avoid fogging or condensation and we have a breather kit option (just like diff breathers) for the serious off roader likely to do bonnet depth creek crossings. JTX are the preferred light chosen by the off road racing guys.

Wiring up the Day Running Lights is very easy They get their earth through the 3 pin H4 headlight socket. The red wire is to power the primary DRL colour. so wire that to the parkers or to a power source that comes on with the ignition. The yellow wire powers the secondary colour which is typically amber in which case connect to indicator or to a separate switch if you have a twin colour set up like red and white.

This is one pair of lights.

Specs:

• The lights have a depth of 65mm, and are 178mm in diameter.
• Headlight amp draw: 3A each.
• Halo amp draw: 0.35A each.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

PLEASE ENQUIRE WITH TEAM@SIEGEOVERLAND.COM TO PLACE YOUR ORDER!

Terrain Tamer Long awaited parabolic spring kit, will ship approx. 1 week from your order due to popular demand, be quick.

These springs are suited for a 50mm lift, and 0–500KG weight capacity, this is the only option currently available for 60 Series Landcruisers.

Traditional 4WD leaf springs are often thick, heavy, uncomfortable and loud, offering little to no flex. In response to this Terrain Tamer developed their 4WD Parabolic Leaf Springs, applying a carefully researched design and modern technology to a well-established idea from the trucking industry.

Utilising new technology on an old design, the parabolic springs allow for a comfortable ride whether the vehicle is fully loaded or empty.

• Lighter – Less unsprung weight
• Less Shock – Less shock load on the differential gears
• Quieter – The leaves do not touch each other
• Comfortable – With better articulation
• Strong – Exceptional load-carrying capability

DON’T MISS OUT.

What is a parabolic spring? 
Parabolic Leaf Springs typically contain fewer leafs than traditional leaf packs and get their name from their tapered “parabolic” design, meaning they are thicker in the centre and thinner at the ends. Already a well-established idea in the trucking industry, Terrain Tamer have applied their own carefully researched design and modern technology, and use a special grade steel to develop their range of Parabolic Leaf Springs specifically for 4WD vehicles.

How do parabolic springs work?
Traditionally heavy linear leaf packs can also be uncomfortable and loud and can create a safety issue, as they offer little to no flex, meaning that when a driver hits a bump, or finds themselves in a rough offroad situation, the rigidity of the leaf pack will cause the opposite wheel will lift, spinning and losing traction, ceasing drive and effectively endangering the driver. In a Parabolic spring, the tapered design of each leaf allows the stress to be distributed more evenly across the spring, and each leaf is allowed to work independently with enhanced flex without sacrificing load capacity, and keeping all four wheels on the ground.

What are the advantages of parabolic springs? 
This design of Parabolic Springs eliminates the weight of often heavy, thick, traditional leaf packs and dramatically reducing the unsprung weight of the vehicle, essentially freeing up the weight needed for practical use. This lower unsprung weight addresses the issue of GVM limits, and also acts to create a more comfortable ride when the vehicle is unloaded, accommodating the varying and ever-changing applications that the modern day 4WD is used for, freeing up weight for towing heavy loads, carrying tools or touring with the family, and ensuring it is comfortable whether empty or loaded. The Parabolic shape also provides better axle articulation, as well as almost no interleaf friction, allowing the spring to compress or extend with ease without touching each other until there is a reasonable load on the vehicle. This feature means that the springs are not only quieter, but it also acts to help minimise any issues with rust build up, which can be a major cause of failure in standard leaf springs.

Do parabolic springs offer better flex?
The Parabolic design allows the spring to flex while still providing the strength needed to bear the weight of heavy loads. This is particularly useful in 4WD applications that carry excessive load on the driveline, or when challenged with difficult terrain, as the flex afforded with a Parabolic Spring lets it give a little when the driver hits a bump in the road, allowing the differential housing to rotate with the springs and effectively providing a smoother ride, reducing the shock transferred to the crown wheel and pinion, stopping the wheel from spinning and maintaining safety and drive. The same force with a standard leaf pack would almost certainly cause more shock to the vehicle and driver 

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for all 60 and 80 series Toyota Land Cruisers contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.

Please note: all 60 series body stripe kits from Touge Nation are made-to-order, and kits can take 3-4 weeks before being dispatched for delivery.

A beautiful body stripe kit available in two period colours for your Toyota Land Cruiser J-60 to give it a completely unique look that it deserves and you're going to love, this stripe kit has been created to fit perfectly and look amazing on your vehicle. Printed on premium vinyl, proven to withstand the harsh outdoors.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
  

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

The Mass Noise Liner Joining Kit comes complete with our mass loaded vinyl in its raw form to match our Mass Noise Liner products. Together with our specific cyanoacrylate glue this kit allows you to patch any relief cuts, overlap and join your sound barrier layer to create a total seal.

Size:
3m x 75mm
2mm thick mass loaded vinyl

This will help make your sound barrier underlay a perfect tailored fit to avoid leaking any sound through gaps. You can even get creative and glue tabs with velcro for removable applications.

Vinyl Specs: 

Size:

• 3m x 75mm
• 2mm thick mass loaded vinyl

Glue Specs:

• Appearance: Clear Liquid
• Composition: Ethyl Cyanoacrylate
• Viscocity: Low
• Cure Speed: Fast
• Strength: High

Car Builders Mass Noise Liner is a 12mm thick, heavy weight, acoustic barrier. This product is used over the top of sound deadening (stage 1) which is applied directly onto the sheet metal. Sound deadening stops noise created by panel vibration whereas Mass Noise Liner (stage 2) reduces air borne noise generated from the engine, road etc. This premium carpet underlay is an OEM product used in high-end luxury vehicles. Mass Noise Liner replaces cotton jute or shoddy, creating far superior sound proofing results.

Construction
2mm Mass Loaded vinyl upper layer, coupled with an 10mm closed cell foam to create the most effective means of acoustic blocking. Our flexible closed cell foam is water resistant and offers superior thermal insulation.

Features/Advantages

• Heavy duty sound blocking
• Water resistant 
• Removable
• Cuts with scissor and knife
• Reduces heat transfer
• Does not rot or deteriorate

Applications

• Firewalls
• Cargo areas
• Van floors
• Boot floors

It is not 100% necessary to put Stage 1 Sound Deadener underneath Mass Noise Liner on cargo area floors or van floors due to the metal already being fairly rigid from the ribs. The Mass Noise Liner will be an effective floor sound proofing by itself. 

Ideal for:

• 4WD's and muscle cars - firewall barrier to reduce engine noise
• Trucks - reduce engine noise and heat on floors and firewalls, great for serviceability
• Exhaust drone - drop in as a boot liner to reduce exhaust drone particular common in 6's, V8's and flat fours.
• Engine rooms, compressors etc
  
  

Note: due to the weight of our Mass Noise Liner it is not recommended for use on the underside of horizontal surfaces. For these applications you should use our light weight foam such as Acoustic Liner, Water proof carpet underlay, Under bonnet insulation or our 6mm Insul-layer.

Ideal for: 4WD's - firewall barrier to reduce engine noise Trucks - reduce engine noise and heat on floors and firewalls, great for serviceability Exhaust drone - drop in as a boot liner to reduce exhaust drone particularly common in 6's, V8's and flat fours. Engine rooms, compressors etc

Plushlay is the ‘easy to install’ solution when it comes to selecting under carpet insulation in your vehicle. Designed to replace and improve on traditional cotton or sisal variations, Plushlay utilises a balance of density and thickness to give you a premium under foot solution, which will fit and feel like your carpet did when it was new.

- Contours to complex shapes
- Minimal cutting required
- Will not breakdown or rot
- Odourless

You can use a Spray Adhesive to glue it in position, or simply place it into position, making it removable at a later date.

If you're chasing a factory finish and period correct look, Plushlay is the solution for you.

Thickness:                                           16mm ±2 (5/8”)

Weight:                                                1200gsm (±120gsm)

Burn rate:                                            95mm/min (FMVSS302)

Sheet Size:                                           1.8m x 950mm

Car Builders Insul-Layer is a peel and stick closed cell foam designed to fit in tight areas. It offers acoustic and thermal insulation, prevents condensation and is very affordable.  

Our Insul-Layer will not rot, attract mould and is easy to cut and apply.

NOTE: For all inverted or vertical applications that will be covered in carpet/fabric (IE having more weight added to the surface of the Insul-Layer), we recommend applying an upholstery grade Spray Adhesive rate at 120°C. 

Features/Advantages

• Light Weight
• Easy installation - just peel off the release liner and adhere to surface.
• Cuts with scissor and knife
• Reduces heat transfer
• Does not rot or deteriorate
• Affordable

Applications

• Roof skins 
• Inside cavities
• 1/4 panels
• Doors
• In-between trim panels to reduce vibrations/rattles (3mm Insul-Layer's main purpose)
• Vans & campers (6mm 6.5M Roll is perfect for these)

(6.5M Roll is plain black, no branding)

What are the rules for applying a peel & stick product?

It is vitally important when laying a peel & stick product that the surface is thoroughly cleaned to remove any grim or dirt. We use a wax and grease remover. If you use a product such as methylated spirits or turps, as these are oil based, they will leave a residue that can affect the bond. Use a isopropyl alcohol (wax and grease remover) to remove this film.

Peel & stick products adhere well to metal surfaces, however if you are sticking the product to porous or rough materials, such as factory bitumen sound deadener, the product will require additional Spray Adhesive. 

Peel & stick products should not be stretched when applied to a surface as the material will eventually want to 'pop' back.

You need to ensure that peel & stick products are thoroughly rolled down, with pressure applied across the entire product to ensure that it has firmly adhered to the surface. We use an Application Roller.

If you find an air bubble, you should pierce the bubble to release the trapped air and roll the product down firmly.

We recommend using additional spray adhesive when using products in inverted positions or if you are directly adding further weight onto the product, such as glueing 4-way stretch carpet to the product's surface.

Car Builders Water Proof Carpet Underlay is a single layer, closed cell foam, meaning it does not hold water. It also works great as a thermal and acoustic insulation barrier.

It is suitable for 4x4's, convertibles and industrial vehicles, which get constantly exposed to wet environments.

Car Builders Water Proof Carpet Underlay will not stay damp, smell, rot or attract mould like pre-dated cotton mill scrap, traditionally used under carpets.

It comes with a peel and stick backing and is easy to cut and install. It is also effective as a thermal barrier to reduce heat transfer from the exterior of your vehicle.  The material will reduce radiant heat by up to 20°C, and can be the difference between discomfort and pleasure.

Features/Advantages

• Light Weight
• Easy installation - just peel off the release liner and adhere to surface.
• Cuts with scissor and knife
• Reduces heat transfer
• Does not rot or deteriorate

Applications

• Under carpets
• Roof skins
• Inside cavities
• 1/4 panels
• Doors
• Firewalls

Size

Each box comes with 1 sheet inside, each sheet is 1800mm x 950mm resulting in 1.71sq/m.

Waterproof Carpet Underlay FAQ

What thickness carpet underlay should I use?

Carpet underlay thicknesses range between 4-12mm. This range allows you to insulate effectively and fit it under tighter areas such as the transmission tunnel.

Specifications:

Thickness:
10mm

Weight:
0.55kg/sm

Sheet size:
1800 x 950mm 

Material:
Closed cell foam

Adhesive Resistance Temperature Range:
-40°C to +110°C (long term) +135°C (short term)

Flame retardant:
Yes, B2

Are you thinking it's time to upgrade those old rusty, seized nuts and bolts on your 60 series landcruiser? 

Grab this 370 piece yellow zinc coated set today to make your 60 feel (a little bit) shiny and new again 🔩

This nut and bolt kit is specifically designed for any pre-1990 Landcruiser. 

Manufactured to our high quality & strength standard, and black zinc coated, to help prevent bolt shearing and save you time!

Each Kit Contains:

• 50 - M5 Serrated Nut M8 Head
• 80- M6 Serrated Nut M10Head
• 50 - M8 Serrated Nut M12 Head
• 25 - M10 Serrated Nut M14 Head
• 10 - M6.3 x 19mm M10 Hex Head Self Tapper
• 25 - M5 x 22mm Panel Bolt M8Head, 18mm Washer philips head
• 50 - M6 x 20mm Panel Bolt M10 Head flat and spring washer
• 25 - M6 x 20mm Panel Bolt M10 Head with 18mm Washer
• 25 - M6 x 25mm Bolt Panel M10 Head flat and spring washer
• 20 - M8 x 25mm Panel Bolt M12 Head flat and spring washer
• 10 - M10 x 30mm Panel Bolt M14 Head flat and spring washer
  

Sent via Auspost, these often arrive within 4–8 days of ordering 😁

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Please note: all 60 series body stripe kits from Touge Nation are made-to-order, and kits can take up to 3-4 weeks before being dispatched for delivery.

This premium body decal features unique horizontal strobe printed on a clear substrate and over-laminated for the ultimate in UV protection and scratch resistance. A beautiful body stripe kit available in a wide array of colours for your Toyota Land Cruiser J-60 to give it a completely unique look that it deserves and you're going to love, this stripe kit has been created to fit perfectly and look amazing on your vehicle. Printed on premium vinyl, proven to withstand the harsh outdoors.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

NOTE: product is made-to-order please allow up to 5-7 weeks before your order is dispatched.

Looking to upgrade those 30+ year old floor mats, with some fresh carpet mats in your 60 series?

This set of Tap Mats are the ultimate solution, moulded to suit your 3/4 Bench Seat 60 series setup!

Product images are for reference only, all mats are manufactured to suit vehicle.

Genuine Trap Mats are the same as Sandgrabba Mats made in Carpet. Perfect 4WD Carpet Mats to keep Sand, Dirt, Mud and liquids off your 4x4 carpets. With a unique side sill fastening system, the mats can be removed for cleaning in seconds and there is no need to make holes in your original flooring creating another inlet for sand to get under and into your 4X4.

Trap Mats are moulded to the exact profile of the floor pan of your vehicle making for easy installation and is suitable for a DIY install. 

Our Mat colours are based on the original Manufacturers Interior Colours.

We have been suppling our Carpet Trap Mats across Australia and World Wide for over twenty years.

Join the thousands of happy customers and ensure your Trap Mats are from No Bull Accessories, " Proudly Australian Made and Owned."

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

This is a quality aftermarket, brand new fan clutch by Dayco. This fan clutch is a suitable replacement for your factory fan clutch.

Designed for 2H and 12HT engines.

FROM DAYCO: 
Dayco Fan Clutches are die-cast aluminium and have a machined body that helps to provide for a tight fit within close tolerances, while producing precision performance. Deep fins increase surface area for improved heat dissipation, while exclusive drive spines are knurled and burnished. The shaft surface resists slippage caused by heavy torque loads and assures longer bearing life. Top-quality bearings ensure longer life and quiet, smooth running. A special silicone fluid inhibits heat build-up to prolong service life. A bi-metal thermostatic spring adjusts the fan speed in response to operating temperature requirements - reducing fuel consumption.

Please note: some parts may be on back-order and can take between to 1-4 weeks before dispatch. 

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.