HJ60

PLEASE NOTE: all Solarscreen kits are now available for 2026 PRE-ORDER, your order will be made-to-order and dispatched in approx. 2-4 weeks.

We are so excited to bring you Solarscreen Window Insulation manufactured to fit YOUR sixty series landcruiser! 

If you deal with some extreme summer heat, like us here down-under, or if you haven't got a functioning air conditioner...Solarscreen kits are an absolute GAME CHANGER when it comes to keeping the heat out in summer, or the warmth in for winter. 

Plus, this product could not be easier to install OR remove when you aren't using them, with high quality suction discs that don't fall off every 5 seconds!

3XM Canopies 60 Series Lift-Up Window compatible option now available. 

- PHOTO CREDIT: @sivanheyns, @fixie60, @gumpyspilgrimage via Instagram

———-

IMPORTANT NOTICE : Solarscreen / insulated panels are not legal for use while driving in all states or countries.

Purchasers assume any and all responsibility to become informed of their local road rules and laws, and the interaction of the products they purchase and intend to use with those relevant laws.

Siege intends to sell Solarscreen products for use in a secure, camping, stationary parked, off-road context — where reasonably safe and appropriate. Motor vehicles are dangerous, Solarscreen products should not be used on a vehicle if they may, in any manner, further impact or endanger safety: (including but not limited to: vision, heat, or free-movement) of any persons, children, passengers, animals or drivers. Solarscreen, (or any other) products should only be used where a reasonably cautious and sensibly, informed driver would consider it safe and legal to utilise them for their intended purpose, only. This product’s purpose is to insulate a parked, stationary vehicle (from light only) that is empty (void of) of any persons or animal — where use will not affect the safety of any persons (passengers or bystanders), driver or other road users. Similar to any common windscreen shade purchased at a common retail store — this product’s intention is to be used where safe and parked at stationary, only. Partial screens allow for a parked vehicle’s maintenance of dash-camera vision and should be used when parked stationary only, use any other way is done so at the driver / owner / purchaser’s own risk and they acknowledge to disregard road rules and this notice. 

If you have any questions regarding the appropriate use of the product please consult your local road rules, or for more product information please contact us at team@siegeoverland.com

———

A NOTE FROM SOLARSCREEN:

Keep the heat out in summer.
Nine layers of material ensure excellent insulation, reducing air-conditioning costs and eliminating damage to your vehicles interior caused by the powerful rays of the sun. 

Keep the warmth in during cold nights
While Solarscreen's insulation will prevent heat from entering your vehicle, they will also prevent heat from leaving your vehicle during the cold winter months.

Made to the exact shape of every window
Solarscreens are made using templates from each window!

Easy to put up and pull down
Solarscreens are attached to the glass using a series of suction discs. Our discs are manufactured exclusively for their effectiveness (no falling off every five minutes), and also their durability in high temperatures. By using suction discs to attach each screen to the glass we are able to keep the screen flush to the glass optimising the insulation. Attachment this way also enables you to open and close doors without removing your screens.

Absorb Sound
Nine layers of insulation work together to absorb sound as well as provide insulation from the heat and cold.

Block out light
Solarscreens insulating effectivness is achieved by blocking the path of light waves (both visible light waves and invisible heat waves). This means that no more light will come in through your windows - no more waking up with the first morning light!

Prevent 80% condensation
Solarscreens' composition includes three layers of closed cell anti-condensate material. By preventing the warm air from meeting the glass, Solarscreen's insulation eliminates 80% of condensation - no more drips!

Strong storage bag
Solarscreens are supplied with a heavy-duty 210 denier nylon storage bag for compact and convenient storage while not in use. When rolled into the bag, and average cab set (three windows) is approximately 20cm diameter. 

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Ultimate style and class; the Sahara Style Flares.

CURRENT MANUFACTURING LEAD TIME: 6-7 weeks

NOTE: for individual replacement flares to suit vehicles with OEM flares vehicles - please see our seperate listing.

Sahara’s traditionally came with fibreglass flares; they gave them a stronger, thicker and even ‘stauncher’ look 😤

It’s hard to track down a good set, some that fits, bolts up and is new and free of damage.

Well, Mick at FRP flares was asked to help a few mates replace their cracked Sahara flares and he came up with these Sahara style flares for those who were after the awesome look 👀😍

FRP Flares, are the BEST aftermarket flares available for 60 Series Landcruisers.

These flares come as a full set, and are supplied in a black or white gelcoat finish, allowing you to paint them to match or contrast your current paintwork 🎨

FRP recommend priming and painting for a good quality and uv resistant finish.  

They're easy to paint and there's no special treatment required, simply sand, prime, sand and paint as you would any panel on the vehicle ✅

Due to the age of the moulds some refinishing may be required, but not much at all 👌🏽

When installing, the top edge of the flares get covered by the rubber seals, underside is a hollow fibreglass.

As you can see in the photos these flares finish at the bottom of the guards so no need for genuine mudflaps.  

FRP flares are screwed to the underlip of the guards, allowing the most cost effective and more importantly the strongest fit possible unlike double sided tape, avoiding fragile and intrusive fitment.

Screws not  included – as a guide 8 gauge 20mm self-drilling button heads, may be most appropriate.

Door flares are supplied with a fibreglass bracket which is screwed to the door then the door flare is screwed to the bracket, this means your flares will never fall off. 

Some things to know before purchasing:

• FRP state that these DO NOT replace genuine Sahara flares but act as an alternative 🤙🏽
• These flares should be installed by a professional 👨🏽🔧
• Shipping is expensive, we apologise! We are trying to find a more economical option but come up short, due to the size of these. If you want to pick these up from Brisbane, Australia please let us know. This is possible 📦
• Although it is possible to install them yourself; we will not warrant, guarantee or grant the return any fibreglass, FRP or Flares products that are installed incorrectly and/or not installed by a professional 🚫
• When purchasing these flares you accept all of these conditions, as well as our terms of service, found below.

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Fresh nuts and bolts, there is nothing better! Well, almost 😎

If you have seized, rusty bolts on your 60 series (there is a 95% chance of this), then it is likely you could use this kit ✔️

There is something extremely satisfying in replacing old tired bolts with some freshly zinc plated nuts and bolts 😍

This nut and bolt kit is specifically designed for any pre-1990 Landcruiser. 

Manufactured to our high quality & strength standard, and yellow zinc coated, to help prevent bolt shearing and save you time. This kit has saved us many times on our own 60, you won't regret this purchase.

Each Kit Contains:

• 55 - M5 Serrated Nut, 8mm Head.
• 150 - M6 Serrated Nut, 10mm Head.
• 50 - M8 Serrated Nut, 12mm Head.
• 30 - M10 Serrated Nut, 14mm Head.
• 30 - M6.3 x 19mm M10 Hex Head Self Tapper.
• 30 - M5 x 22mm Panel Bolt, 8mm Head, 18mm Washer.
• 75 - M6 x 16mm Panel Bolt M10 Head.
• 30 - M6 x 20mm Panel Bolt M10 Head with 18mm Washer.
• 30 - M6 x 25 Panel Bolt, 10mm Head
• 25 - M8 x 25mm Panel Bolt, 13mm Head
• 25 - M10 x 30mm Panel Bolt, 14mm Head

Sent via Auspost, these often arrive within 4–8 days of ordering 😁

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

Welcome to storage.. level 1200, unlocked 🔓🧳

The Huracan Tailgate storage mod is a must do; if you're thinking about it... I get it 🤔

Why bother? 🥱

Let me tell you some problems this WILL solve for you 👇🏽

• Organisation 🗃
• Storage 🧰
• Travelling efficiency 🚙
• Strong 💪🏽
• Use as a bench 🍳
• Easy install, under 45mins ✅

If you travel in your 60, and you have a tailgate, you're already winning in our opinion, but once you install one of these bad boys; it is a game changer ⛳️

It means that you can store recovery, cleaning, tool, tyre changing or whatever other gear your feel necessary all in one spot.

The kit comes with close cell foam for sound and panel insulation 🤫 🔇; so nothing needs to be sitting directly on your tailgate panel (on the inside), and potentially harming the panel, like you and all us have been doing on the inside rear quarter panels 😩

The installation is super simple, requiring a grinder, sockets and a screw driver you simply mark our the template included trim out the section of tailgate and utilise the existing trimming holes to bolt the storage mod to 👩🏽‍🔧

From Huracan Fabrication:
"This precision laser cut steel modification plate allows you to turn your tailgate into a locked compartment within your car.

You can use the space to store recovery gear, spare parts or anything else that will fit and you want to keep secure. This is a DIY kit and requires you to trim away some of the metal in the tailgate. To assist with this, we provide step by step easy to follow instructions and a handy template to show where the cuts are required. This can be performed with tin snips, a jigsaw or an angle grinder.

By default, the kit will be painted black and ship with all mounting hardware required such as nuts and bolts for mounting, hinge and associated screws as well as the heavy duty low profile locks. Sound deadening foam to stick inside your tailgate which prevents damage to the steel and eliminates rattles is also included. Please allow up to one week handling time for your kit to be assembled, packed and picked up by our couriers."

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Reproduction Turbo decal to suit 60-Series Land Cruiser fitted to upper tailgate, both designed and sized based off an OEM sample as well as tested on an original vehicle to ensure correct fitment, this decal is guaranteed to be correct. Printed and 2000-Series Avery vinyl and clear over-laminated for years of trouble-free use.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Welcome to performance 👑

For years we searched for an intercooler that worked with our HJ61 / 12HT; we wanted something that fit, something of high quality and finally something that was large enough to make a difference on EGT's and IAT's.

We, like you, wanted:

• 💨 Performance
• ⚡️ Quality
• 🔩 Fitment
• 👌🏽 Reliability
• 📞 Manufacturer support

Then, we came across the PDI intercooler from Brian at Performance Diesel Intercoolers in W.A, Australia 🇦🇺

After speaking with Brian, understanding the size of this intercooler, and its design to enable fitment into the HJ61 Landcruiser, as well as it's specs and quality we knew we had to have it 🎁

Not only that, it looked bass ass 😎

If you've got a 12HT or a 2HT, usually you're keen for a little more power, more torque and better performance. 💪🏽

How do we achieve that with these old but brilliant motors? Simple; boost and fuel, > BUT this means higher EGT's and thus higher IAT's; which means hotter engine, rings going bad, overheating, head warping etc etc. 🔥😢

If you have gone through the trauma of any of the above on your beloved 12HT/2H motor then you're understanding how important it is to AVOID this at all costs 👎🏽

Because this means: 

• Getting the engine built; but then there's the cost, what if the builder isn't good and/or make an error, what about their warranty, what if the build cost blows out 💸
• Building the engine yourself; means needing to find space (mum's garage may not fit a small truck engine), finding the time; will it be one of the 50% complete projects for 3 years? you're thinking : "I hate those, my 60 is already one of those!" ⏳

If you're wanting more power, then this is for you; it means boost, cooler EGT's and lower IAT's, it means peace of mind 😌 and motivates you to get your diesel tuned (properly on a dyno 🙄), it means better trips and it looks mean 😈

* Please note, if utilising a custom set-up piping may not fit your set-up. Please let us know your requirements the closest possible will be supplied. This kit is for a 12HT set-up only, whilst we do our best to accomodate a 2H custom set-up, the responsibility of fitment it up to the customer.  

From PDI:

The PDI Landcruiser 60 series HJ61 HJ60 Front mount intercooler is designed to fit on both the round headlight and the twin square light model. It sits further back than all other designs we have seen as it has recessed areas in the end tanks for the condenser fittings and piping.

The core is 545 x 300 x 65mm.

Pipes are stainless steel and is supplied with a stainless flange onto the intake manifold, which does a 180deg bend under the air supply pipe.

Plus, it looks awesome!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Please note: all 60 series body stripe kits from Touge Nation are made-to-order, and kits can take up to 3-4 weeks before being dispatched for delivery.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

This kit has been meticulously reproduced and professionally printed with attention to detail. Custom colours available at additional cost, contact for more information. Our stripes are "Application Ready", easy-to-install and professionally manufactured from the highest quality Avery vinyls with clear laminate to ensure years of trouble-free use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
  

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Reproduction Direct Injection Turbo decal to suit 60-Series Land Cruiser fitted to tailgate, both designed and sized based off an OEM sample as well as tested on an original vehicle to ensure correct fitment, this decal is guaranteed to be correct. Printed and 2000-Series Avery vinyl and clear over-laminated for years of trouble-free use.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

The ultimate nut & bolt replacement kit for anyone restoring, repairing or upgrading their 60 series 🔥

When you pull out those 30+ year old nuts & bolts from your rig, this kit will come in handy...we promise 🙏

This nut and bolt kit is specifically designed for any pre-1990 Landcruiser. 

Manufactured to our high quality & strength standard, and yellow and blackzinc coated, to help prevent bolt shearing and save you time. 

What's included? 

1 x 730 Piece Set, Yellow Zinc Coated:

• 55 - M5 Serrated Nut, 8mm Head.
• 150 - M6 Serrated Nut, 10mm Head.
• 50 - M8 Serrated Nut, 12mm Head.
• 30 - M10 Serrated Nut, 14mm Head.
• 30 - M6.3 x 19mm M10 Hex Head Self Tapper.
• 30 - M5 x 22mm Panel Bolt, 8mm Head, 18mm Washer.
• 75 - M6 x 16mm Panel Bolt M10 Head.
• 30 - M6 x 20mm Panel Bolt M10 Head with 18mm Washer.
• 30 - M6 x 25 Panel Bolt, 10mm Head
• 25 - M8 x 25mm Panel Bolt, 13mm Head
• 100 - M6 Washer
• 50 - M8 Washer
• 50 - M10 Washer
• 25 - M10 x 30mm Panel Bolt, 14mm Head

1 x 550 Piece Set, Black Zinc Coated:

• 50 - M5 Serrated Nut, 8mm Head.
• 50 - M6 Serrated Nut, 10mm Head.
• 50 - M8 Serrated Nut, 12mm Head.
• 50 - 4.8mm x 16mm Phillips Head Self Tapper Screws
• 50 - M6.3 x 19mm M10 Hex Head Self Tapper,16mm Washer.
• 30 - M5 x 19mm Panel Bolt, 8mm Head, 13mm Washer.
• 50 - M6 x 16mm Panel Bolt M10 Head.
• 25 - M6 x 18mm Panel Bolt M10 Head with 20mm Washer.
• 25 - M6 x 25 Panel Bolt, 10mm Head with 20mm Washer
• 25 - M8 x 25mm Panel Bolt, 12mm Head
• 50 - M6 Flat Washers
• 50 - M8 Flat Washers
• 50 - M10 Washer

Sent via Auspost, these often arrive within 4–8 days of ordering 😁

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service. 

NOTE: product is made-to-order please allow up to 5-7 weeks before your order is dispatched.

Looking to protect your 60 series carpet from all the sand, dirt and everything in between that gets into your 60?

This set of Sandgrabba mats are the ultimate solution, moulded to suit your 3/4 Bench Seat 60 series setup!

For LHD variant: email team@siegeoverland.com

Product images are for reference only, all mats are manufactured to suit vehicle.

The Sandgrabba floor mat system is moulded in a quality Poly/Rubber TPE compound precisely to the shape of the vehicle floor. The unique ridge design catches sand, mud, dirt and liquid spillages to protect the car carpet or vinyl.

• Unique ridge design catches all of the muck
• Quick-release side sill fastening system allows for easy removal
• Durable & flexible PVC / Rubber TPE construction
• Non-skid foam backing stops movement and is gentle on carpet and vinyl
• Available in Black, Grey or Beige for most cars, commercials, 4wd's and Suv's
• Sandgrabba Mat colours are based on the original Manufacturers interior colours
•  No need to make holes in your original flooring creating another inlet for sand to get into your 4x4
• Sandgrabba Mats are Proudly Australian Made and Owned

Please note: all 60 series body stripe kits from Touge Nation are made-to-order, and kits can take up to 3-4 weeks before being dispatched for delivery.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

This kit has been meticulously reproduced and professionally printed with attention to detail. Custom colours available at additional cost, contact for more information. Our stripes are "Application Ready", easy-to-install and professionally manufactured from the highest quality Avery vinyls with clear laminate to ensure years of trouble-free use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
  

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Please note: all 60 series body stripe kits from Touge Nation are made-to-order, and kits can take up to 3-4 weeks before being dispatched for delivery.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

This kit has been meticulously reproduced and professionally printed with attention to detail. Custom colours available at additional cost, contact for more information. Our stripes are "Application Ready", easy-to-install and professionally manufactured from the highest quality Avery vinyls with clear laminate to ensure years of trouble-free use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
  

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Direct reproduction plate depicting the engine details of Toyota 2H model motors. Meticulously reproduced off an OEM sample with a state-of-the-art printing system. Printed on premium vinyl and over-laminated to ensure years of trouble-free service.

Printed on .8mm semi-rigid aluminium shim stock and clear over-laminated for years of trouble-free use.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Reproduction 74552-60173 Tyre Placard decal to suit 60-Series Land Cruiser, this decal has been meticulously reproduced based off an OEM sample and sized correctly on an original vehicle.. Printed and 2000-Series Avery vinyl and clear over-laminated for years of trouble-free use.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

We are excited to bring you an under bonnet insulation to suit your 60 series landcruiser (all years). 

This product is an aftermarket item and is not an exact copy of the original TOYOTA item.

Tests show that this product absorbs more noise than most other types of pads. This is due to its multi-density construction which absorbs a larger range of noise frequencies than other single layer products.

PLEASE NOTE: Due to the size of the box, it must be sent via courier, not AusPost. We must have a street address (NOT PO Box's and parcel lockers etc.)

Installed in seconds! Fully pre-moulded & cut to size. Comes with clips to fit factory holes. No gluing or cleaning required. Under Bonnet noise/heat pads are standard equipment on all upmarket vehicles absorbing engine and road noise before it can enter the passenger cabin. Have you ever had polished floorboards in a room which has then had carpet installed? The room becomes so much quieter! Our Under-Bonnet Noise Absorption pads work on the same principle.

FIRE RETARDANT - resists absorption of oils, petrol etc. Exceeds international standards relating to under-bonnet fire safety regulations, including regulations: DIN75200, DIN54333, US-FMVSS-302

NOTE: This item is made to order, please allow between 3-4 weeks for your order to be dispatched.

For more information, please refer to our Terms of Service. By purchasing from our site you acknowledge that you have read and agree to our Terms of Service.

Please note: all 60 series body stripe kits from Touge Nation are made-to-order, and kits can take up to 3-4 weeks before being dispatched for delivery.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyls for the ultimate in long-term use.

This kit has been meticulously reproduced and professionally printed with attention to detail. Custom colours available at additional cost, contact for more information. Our stripes are "Application Ready", easy-to-install and professionally manufactured from the highest quality Avery vinyls with clear laminate to ensure years of trouble-free use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
  

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

These are our famous 7 Inch LED Headlights, featuring impressive range, good spread, colourful halos and are indestructible. These draw less power than your regular halogen / HID globes too, and are ADR compliant, meaning they’re legal in every state. This is one pair of lights.

These lights come with a pair of CANBUS Load Modules to make the lights compatible with your Toyota.

These are 7″ round headlights and they fit all 7″ round applications. We have sold thousands and we are yet to have a car with 7″ lights they don’t fit. They are to suit Australian left side of road and are legal in all states. In fact they have ADR cert stamped on the lens and come with an ADR reference sheet.

JTX LED lights are made by us here in Melbourne. We carry all the components to make up all colour combinations. We make them up and send next day or even same day if we know soon enough. We are the only manufacturer of LED headlights in Australia – please consider supporting Australian businesses.

These are unbreakable. They come with a lifetime warranty and we will replace a light even if it is damaged in a collision. You cant even break them with a hammer.

They have breathers so as to avoid fogging or condensation and we have a breather kit option (just like diff breathers) for the serious off roader likely to do bonnet depth creek crossings. JTX are the preferred light chosen by the off road racing guys.

Wiring up the Day Running Lights is very easy They get their earth through the 3 pin H4 headlight socket. The red wire is to power the primary DRL colour, so wire that to the parkers or to a power source that comes on with the ignition. The yellow wire powers the secondary colour which is typically amber in which case connect to indicator or to a separate switch if you have a twin colour set up like red and white.

Specs:

• The lights have a depth of 65mm, and are 178mm in diameter.
• Headlight amp draw: 3A each.
• Halo amp draw: 0.35A each.

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service. 

Direct reproduction plate depicting the engine details of Toyota 12H-T model motors. Meticulously reproduced off an OEM sample with a state-of-the-art printing system. Printed on premium vinyl and over-laminated to ensure years of trouble-free service.

Printed on .8mm semi-rigid aluminium shim stock and clear over-laminated for years of trouble-free use.

All TOUGE NATION decals are professionally printed on high quality Avery Dennison exterior vinyl's for the ultimate in long-term use.

• Waterproof, UV Stable and Scratch Resistant
• Printed High-Quality Avery Vinyl (7 Year Guarantee)
• Ideal Indoor or Outdoor Use
• Made 100% In Australia
• Money-Back Satisfaction Guarantee!

For more information, please refer to our Terms of Service. By purchasing off our site you acknowledge that you have read and agree to our Terms of Service.